Abstract

Keyword: Intelligent tribological design, predictive materials manufacturing, high entropy wear resistant coatings, AI-optimized hybrid composites, optimized metal matrix optimization.

Full Text PDF

Refrences:

1. P. M. Mathebula, P. Sarmah, and K. Gupta, “Fabrication and metallurgical characterization of
hybrid al matrix composites reinforced with SiC and Al2O3 using powder metallurgy,” The
International Journal of Advanced Manufacturing Technology 2026, pp. 1–18, May 2026, doi:
10.1007/S00170-026-17757-8.
2. F. Besharati, M. H. Paydar, and M. R. Nourian, “Fabrication and characterization of copper-alumina
composite tubes via electroforming: Microstructure, mechanical properties, and corrosion
resistance,” Journal of Materials Research and Technology, vol. 39, pp. 8591–8601, Nov. 2025,
doi: 10.1016/J.JMRT.2025.11.176.
3. V. Boobalan and T. Sathish, “A comprehensive study on boron carbide reinforcement in
Aluminum-and its alloy composites,” Mater. Today Proc., vol. 69, pp. 1238–1241, Jan. 2022, doi:
10.1016/J.MATPR.2022.08.319.
4. S. Sivaraman, N. Radhika, and M. Abubaker Khan, “Machine Learning-Driven Prediction of Wear
Rate and Phase Formation in High Entropy Alloy Coatings for Enhanced Durability and
Performance,” IEEE Access, vol. 13, pp. 33956–33975, 2025, doi:
10.1109/ACCESS.2025.3542507.
5. S. Jayasathyakawin and M. Ravichandran, “Fabrication and wear behaviour of Mg-3wt.%Al-x wt.
% SiC composites,” Heliyon, vol. 9, no. 2, p. e13679, Feb. 2023, doi:
10.1016/J.HELIYON.2023.E13679.
6. P. Dhanalakshmi and R. Porkodi, “Extraction of Association Rules from Tobacco Smoke Effect on
the Placenta Microarray Dataset using Gene Ontology Based Optmized Association Rule Mining,”
Proceedings of the 2018 International Conference on Current Trends towards Converging
Technologies, ICCTCT 2018, Nov. 2018, doi: 10.1109/icctct.2018.8550982.
7. V. K. Lagisetti, A. P. Reddy, and P. V. Krishna, “Dry Sliding Wear Study on AA6061/SiCp Nano
and AA6061/SiCp/Gr Hybrid Nanocomposites,” Silicon 2022 14:18, vol. 14, no. 18, pp. 12235–
12250, May 2022, doi: 10.1007/S12633-022-01908-Z.

8. J.-H. Lee and J.-S. Kwak, “Machine learning-aided prediction of burr removal in electropolishing-
assisted magnetic abrasive finishing of micro-grooved surfaces,” The International Journal of Advanced Manufacturing Technology, Jun. 2026, doi: 10.1007/S00170-026-18317-W.

45800 45900 46000 46100 46200 46300 46400 46500
SiC (wt%)
Al2O3 (wt%)
Milling Speed (rpm)
Sintering Temp (°C)

Mean Hardness (HV)

Level
Mean Hardness (HV)
Mean Wear Rate (×10−3
mm3/N·m)
9. A. Kumar and K. M. Moeed, “Hybrid composites materials of reinforced aluminium alloy and its
tribological analysis: a review,” Discover Applied Sciences 2025 7:10, vol. 7, no. 10, pp. 1159-,
Oct. 2025, doi: 10.1007/S42452-025-06918-1.
10. B. Prakash, S. Irudayaraj, and N. Sivanantham, “Enhanced Corrosion Resistance of Hybrid LM13
Composites Reinforced With Zirconium Carbide and Flyash Using Squeeze Casting,” Materials
and Corrosion, 2026, doi: 10.1002/MACO.70145.
11. I. A. Alnaser, “Hybrid-reinforced aluminum matrix composites with enhanced mechanical and
corrosion performance for marine applications,” J. Alloys Compd., vol. 1060, p. 187315, Mar.
2026, doi: 10.1016/J.JALLCOM.2026.187315.
12. J. Kang, Y. Niu, Y. Zhou, Y. Fan, and G. Ma, “Wear Resistance Prediction of AlCoCrFeNi-X (Ti,
Cu) High-Entropy Alloy Coatings Based on Machine Learning,” Metals 2023, Vol. 13, Page 939,
vol. 13, no. 5, p. 939, May 2023, doi: 10.3390/MET13050939.
13. J. Singh and A. Chauhan, “Characterization of hybrid aluminum matrix composites for advanced
applications – A review,” Journal of Materials Research and Technology, vol. 5, no. 2, pp. 159–
169, Apr. 2016, doi: 10.1016/J.JMRT.2015.05.004.
14. S. Jebarose Juliyana et al., “Optimization of Wire EDM Process Parameters for Machining Hybrid
Composites Using Grey Relational Analysis,” Crystals 2023, Vol. 13, Page 1549, vol. 13, no. 11,
p. 1549, Oct. 2023, doi: 10.3390/CRYST13111549.
15. S. Hamoudi, N. Bezzi, F. Bensebaa, and P. Delaporte, “Alumina–Nano-Nickel Composite Coatings
on Al6061 Substrate Obtained by Electrophoretic Deposition,” Journal of Composites Science
2025, Vol. 9, Page 122, vol. 9, no. 3, p. 122, Mar. 2025, doi: 10.3390/JCS9030122.
16. J. Salguero, J. M. Vazquez-Martinez, I. Del Sol, and M. Batista, “Application of Pin-On-Disc
Techniques for the Study of Tribological Interferences in the Dry Machining of A92024-T3 (Al–
Cu) Alloys,” Materials 2018, Vol. 11, Page 1236, vol. 11, no. 7, p. 1236, Jul. 2018, doi:
10.3390/MA11071236.
17. M. A. Taha, M. F. Zawrah, and H. M. Abomostafa, “Fabrication of Al/Al2O3/ SiC/graphene hybrid
nanocomposites from Al-dross by powder metallurgy: Sinterability, mechanical and electrical
properties,” Ceram. Int., vol. 48, no. 14, pp. 20923–20932, Jul. 2022, doi:
10.1016/J.CERAMINT.2022.04.084.
18. P. M. Mathebula, P. Sarmah, and K. Gupta, “Fabrication and metallurgical characterization of
hybrid al matrix composites reinforced with SiC and Al2O3 using powder metallurgy,” The
International Journal of Advanced Manufacturing Technology 2026, pp. 1–18, May 2026, doi:
10.1007/S00170-026-17757-8.
19. J. Lv et al., “Fabrication and characterization of ni60a alloy coating on copper pipe by plasma
cladding with induction heating,” Coatings, vol. 11, no. 9, p. 1080, Sep. 2021, doi:
10.3390/COATINGS11091080/S1.
20. P. M. Mathebula, P. Sarmah, and K. Gupta, “Fabrication and metallurgical characterization of
hybrid al matrix composites reinforced with SiC and Al2O3 using powder metallurgy,” The
International Journal of Advanced Manufacturing Technology 2026, pp. 1–18, May 2026, doi:
10.1007/S00170-026-17757-8.
21. S. Sivaraman, N. Radhika, and M. Abubaker Khan, “Machine Learning-Driven Prediction of Wear
Rate and Phase Formation in High Entropy Alloy Coatings for Enhanced Durability and
Performance,” IEEE Access, vol. 13, pp. 33956–33975, 2025, doi:
10.1109/ACCESS.2025.3542507.
22. Armstrong M., Mahadevan S., Selvapalam N., Santulli C., Palanisamy S., Fragassa C. Augmenting
the double pipe heat exchanger efficiency using varied molar Ag-ornamented graphene oxide (GO)
nanoparticles aqueous hybrid nanofluids. Frontiers in Materials. 2023;10:1240606.
doi:10.3389/fmats.2023.1240606.
23. Mohankumar V., Kapilan S., Karthik A., Bhuvaneshwaran M., Santulli C., Kumar D.T., Palanisamy
S., Fragassa C. A Hybrid Design of Experiment Approach in Analyzing the Electrical Discharge
Machining Influence on Stir Cast Al7075/B4C Metal Matrix Composites. Metals.
2024;14(2):205. doi:10.3390/met14020205.Wear and Tribological Characteristics of Novel Metal Matrix Composites Theja et al.
24. Mehra R., Singh H., Palanisamy S., Mohal S., Kamboj N., Kumar S., Bakhrom A., Shojonov M.,
Shamuratov J., Sankar S.L., Sundararajan K., Belay M. A Taguchi-based optimization on EDM
parameters for enhancing surface roughness in ductile cast iron: Artificial Neural Networks (ANN)-
validated approach. International Journal of Mechanical and Materials Engineering. 2026;21:16.
doi:10.1186/s40712-026-00466-1.
25. Kirubakaran G., Kannan C.S., Anbalagan R.R., Palanisamy S., Alfarraj S.A., Alharbi S.A., Abbas
M., Kalathil S., Belay M. Taguchi-based experimental optimization coupled with explainable
machine learning for predictive modelling of FFF-printed CF-PA composites. The International
Journal of Advanced Manufacturing Technology. 2026. doi:10.1007/s00170-026-17709-2.
26. Tadepalli S., Palanisamy S., Tamma E., Santulli C., et al. Experimental performance evaluation of
alginate-based Zn-Co-Fe/Ba nanocomposite beads for solar desalination and aniline blue dye
removal toward sustainable water purification. Separation and Purification Technology.
2026;395:137222. doi:10.1016/j.seppur.2026.137222.