Abstract

Keyword: PLA-CF composite, parameter optimization, feed rate control, experimental optimization, mechanical evaluation

Full Text PDF

Refrences:

1. M. Csekei et al., “Optimization of Feed Rate in FDM Robotic Additive Manufacturing (RAM) for
Thin-Walled Structures: System Architecture and Experimental Validation,” IEEE Access, vol. 13,
pp. 207063–207083, 2025, doi: 10.1109/ACCESS.2025.3639496.
2. T. L. Liu, P. C. Chen, Y. H. Chao, and K. C. Huang, “A Cyber-Physical Integrated Framework for
Developing Smart Operations in Robotic Applications,” Electronics 2025, Vol. 14, Page 3130, vol.
14, no. 15, p. 3130, Aug. 2025, doi: 10.3390/ELECTRONICS14153130.
3. E. Kassegn, A. Haile, and F. Desplentere, “Experimental investigation on flexural properties of
PLA composites reinforced with sisal fiber under varying conditions,” Composites Part C: Open
Access, vol. 20, Jul. 2026, doi: 10.1016/J.JCOMC.2026.100739.
4. A. S. Mosallam, N. Arreda, H. Isksioui, H. Boutahri, A. L’kadiba, and H. Elmoussami, “FDM
Process Parameters Impact on Roughness and Dimensional Accuracy of PLA Parts,” Engineering
Proceedings 2025, Vol. 112, Page 6, vol. 112, no. 1, p. 6, Oct. 2025, doi:
10.3390/ENGPROC2025112006.
5. M. Csekei et al., “Optimization of Feed Rate in FDM Robotic Additive Manufacturing (RAM) for
Thin-Walled Structures: System Architecture and Experimental Validation,” IEEE Access, vol. 13,
pp. 207063–207083, 2025, doi: 10.1109/ACCESS.2025.3639496.
6. A. De Marzi, M. Vibrante, M. Bottin, and G. Franchin, “Development of robot assisted hybrid
additive manufacturing technology for the freeform fabrication of lattice structures,” Addit. Manuf.,
vol. 66, p. 103456, Mar. 2023, doi: 10.1016/J.ADDMA.2023.103456.

7. F. Insero, V. Furlan, and H. Giberti, “Non-planar slicing for filled free-form geometries in robot-
based FDM,” J. Intell. Manuf., vol. 36, no. 2, pp. 833–851, Feb. 2025, doi: 10.1007/S10845-023-

02250-W.
8. A. Lakkundi, M. Shivaprasad, and S. M. Meena, “Real-time warping detection in fused deposition
modeling using deep learning-based vision models,” Eng. Appl. Artif. Intell., vol. 171, p. 114246,
May 2026, doi: 10.1016/J.ENGAPPAI.2026.114246.
9. A. Rabinowitz, P. M. DeSantis, C. Basgul, H. Spece, and S. M. Kurtz, “Taguchi optimization of
3D printed short carbon fiber polyetherketoneketone (CFR PEKK),” J. Mech. Behav. Biomed.
Mater., vol. 145, p. 105981, Sep. 2023, doi: 10.1016/J.JMBBM.2023.105981.
Additive Manufacturing of Polymer-Based Advanced Composites Theja et al.
10. N. Layeb, I. Oldal, and L. Zsidai, “Flexural strength evolution of 3D printed PLA-CF structures:
optimization of FDM parameters for enhanced mechanical performance,” Journal of Materials
Science: Materials in Engineering 2026 21:1, vol. 21, no. 1, pp. 48-, Feb. 2026, doi:
10.1186/S40712-026-00424-X.
11. F. J. Martínez-Peral, J. B. Méndez, D. Mronga, J. V. Segura-Heras, and C. Perez-Vidal, “Trajectory
planning system for bimanual robots: Achieving efficient collision-free manipulation,” Rob. Auton.
Syst., vol. 194, p. 105118, Dec. 2025, doi: 10.1016/J.ROBOT.2025.105118.
12. I. Mitropoulou, M. Bernhard, and B. Dillenburger, “Curvature-informed paths for shell 3D
printing,” Autom. Constr., vol. 171, Mar. 2025, doi: 10.1016/J.AUTCON.2025.105988.
13. I. Fidan et al., “The trends and challenges of fiber reinforced additive manufacturing,” International
Journal of Advanced Manufacturing Technology, vol. 102, no. 5–8, pp. 1801–1818, Jun. 2019, doi:
10.1007/S00170-018-03269-7.
14. P. K. Verma and H. Vasudev, “Robotic-Enabled Design and Additive Manufacturing,” pp. 143–
179, 2026, doi: 10.1007/978-3-032-19829-7_9.
15. U. I. Cicek and A. A. Johnson, “Multi-objective optimization of FDM process parameters for 3D-
printed polycarbonate using Taguchi-based Gray Relational Analysis,” The International Journal of Advanced Manufacturing Technology 2025 137:7, vol. 137, no. 7, pp. 3709–3725, Mar. 2025,
doi: 10.1007/S00170-025-15392-3.
16. N. Vidakis, M. Petousis, M. Spiridaki, N. Mountakis, A. Moutsopoulou, and E. Kymakis, “Optimization of critical process control parameters in MEX additive manufacturing of high-
performance polyethylenimine: energy expenditure, mechanical expectations, and productivity aspects,” The International Journal of Advanced Manufacturing Technology 2024 132:3, vol. 132,
no. 3, pp. 1163–1192, Mar. 2024, doi: 10.1007/S00170-024-13418-W.
17. N. Tushar, R. Wu, Y. She, W. Zhou, and W. Shou, “Desktop-scale robot tape manipulation for
additive manufacturing,” Device, vol. 3, no. 1, p. 100555, Jan. 2025, doi:
10.1016/J.DEVICE.2024.100555.
18. R. H. Ibrahim and H. Salman, “Manufacturing of polymer-based composite material by FDM:
challenges and opportunities for functional parts design,” Next Materials, vol. 10, p. 101571, Jan.
2026, doi: 10.1016/J.NXMATE.2025.101571.
19. A. Karimi, D. Rahmatabadi, and M. Baghani, “Various FDM Mechanisms Used in the Fabrication
of Continuous-Fiber Reinforced Composites: A Review,” Polymers 2024, Vol. 16, Page 831, vol.
16, no. 6, p. 831, Mar. 2024, doi: 10.3390/POLYM16060831.
20. Ayrilmis N., Kanat G., Yildiz Avsar E., Palanisamy S., Ashori A. Utilizing waste manhole covers
and fibreboard as reinforcing fillers for thermoplastic composites. Journal of Reinforced Plastics
and Composites. 2024. doi:10.1177/07316844241238507.
21. Almeshaal M., Palanisamy S., Murugesan T.M., Palaniappan M., Santulli C. Physico-chemical
characterization of Grewia Monticola Sond fibers for prospective application in biocomposites.
Journal of Natural Fibers. 2022. doi:10.1080/15440478.2022.2123076.
22. Palanisamy S., Mayandi K., Palaniappan M., et al. Mechanical Properties of Phormium tenax
Reinforced Natural Rubber Composites. Fibers. 2021;9(2):11. doi:10.3390/fib9020011.
23. Rajkumar R., Arumugam K., Palanisamy S., Ayrilmis N. Mechanical properties of epoxy
composites reinforced with Areca catechu fibers containing silicon carbide. BioResources.
2024;19(2):2353–2370. doi:10.15376/biores.19.2.2353-2370.
24. Palanisamy S., Mayandi K., Dharmalingam S., et al. Tensile Properties and Fracture Morphology
of Acacia caesia Bark Fibers Treated with Different Alkali Concentrations. Journal of Natural
Fibers. 2022. doi:10.1080/15440478.2021.2022562.