Abstract

Keyword: Abrasive Jet Machining; Abrasive Pressure; Reinforced Plastic with Glass Fibers; Material Removal Rate; Stand-off Distance; Inclined Cutting

Full Text PDF

Refrences:

1. T. Pawar, S. Wagh and R. Shinde, “Literature review on abrasive jet machining”, International
Journal of Engineering Research and General Science, Vol.3, No.3, pp.1047-1051 (2015).
2. A. El-Domiaty, H.M. Abd El-Hafez and M.A. Shaker, “Drilling of glass sheets by abrasive jet
machining”, World Academy of Science, Engineering and Technology, Vol. 56, pp.61-67 (2009).
3. B. Chandra, “A Study of effect of Process Parameters of Abrasive jet machining, International”
Journal of Engineering Science and technology, Vol. 3 No. 1, pp.504-513 (2011).
4. B.C. Kandpal, N. Kumar, R. Kumar, R. Sharma and S. Deswal, “Machining of glass and ceramic
with alumina and silicon carbide in abrasive jet machining”, International Journal of Advanced
Engineering Technology, Vol. II, Issue IV, pp. 251–256 (2011).
5. M.R. Vadgama, K.S. Gaikwad. H.K. Upadhyay and S.G. Gohil, “Experimental analysis of glass
on abrasive jet machine using taguchi Method”, International Journal of Innovative Science,
Engineering and Technology (IJISET), Vol. 2, Issue 4, pp. 875–878 (2015).
6. J.B. Padhy and K.C. Nayak, “Optimization and effect of controlling parameters on AJM using
Taguchi technique”, Journal of Engineering Research and Applications, Vol. 4, Issue. 3, pp.598–
604 (2014).
7. P.K. Sharma and G.S. Doel, “A comparative analysis of process parameters during machining of
glass fibre reinforced plastic by abrasive jet machining”, International Journal of Advance
Foundation and Research in Science & Engineering (IJAFRSE) Vol.1, No.3, pp.28-37 (2014).
8. P. Grover, S. Kumar and Q. Murtaza, “Study of aluminum oxide abrasive on tempered glass in
abrasive jet machining using Taguchi method”, International Journal of Advance Research and
Innovation, Vol. 2, Issue. 1, pp. 237-241 (2014).
9. J.M. Fan, C.Y. Wang and J. Wang, “Modelling the erosion rate in micro abrasive air jet
machining of glasses”, Wear, Vol. 266, Issues. 9–10, pp. 968–974 (2009).
10. L. Zhang, T. Kuriyagawa, Y. Yasutomi and J. Zhao, “Investigation into micro abrasive
intermittent jet machining”, International Journal of Machine Tools and Manufacture, Vol. 45,
Issues7–8, pp.873–879 (2005).

11. S. Vigneshwaran, M. Uthayakumar, V. Arumugaprabu, “Abrasive water jet machining of fiber-
reinforced composite materials”, Journal of Reinforced Plastics and Composites, Vol.37, No.4,

pp.230-237 (2018). https://doi.org/10.1177/0731684417740771
12. F. Wang, X. Wang, R. Yang, H. Gao, Y. Su, G. Bi, “Research on the carbon fibre-reinforced
plastic (CFRP) cutting mechanism using macroscopic and microscopic numerical simulations”,
Journal of Reinforced Plastics and Composites, Vol.36, No.8, pp.555-562 (2017).
https://doi.org/10.1177/0731684416684966
13. M. El-Hofy, M.O. Helmy, G. Escobar-Palafox, K. Kerrigan, R. Scaife, H. El-Hofy, “Abrasive
water jet machining of multidirectional CFRP laminates’, Procedia CIRP, Vol.68, pp.535-540
(2018) https://doi.org/10.1016/j.procir.2017.12.109
14. H.A. Youssef, H.A. Ei-Hofy, A.M. Abdelaziz and M.H. Ei-Hofy, “Accuracy and surface quality
of abrasive water jet machined CFRP composites”, Journal of Composite Materials, Vol.55, Issue
12, pp.1693-1703(2021) https://doi.org/10.1177/002199832097442
15. U. Jayprakash, S. Shantanu, T. Satyam, K. Omkar and C. Abhimanyu, “Manufacturing and
Optimization of Process Parameters by using Abrasive Water Jet Machining of Carbon Fibre
Reinforced Polymer Composites”, International Journal of Recent Technology and Engineering
(IJRTE), Vol.9, Issue 2, pp.955-961 (2020).
16. S.T. Kumaran, T.J. Ko, M. Uthayakumar and M.M. Islam, “Prediction of surface roughness in
abrasive water jet machining of CFRP composites using regression analysis”, J Alloys Compd.
Vol.724, pp.1037-1045 (2017). http://dx.doi.org/10.1016/j.jallcom.2017.07.108
17. S. Rajesh, J. Manivannan and R. Chokkalingam, “Machinability examination on Nylon-6 GFRP
composite with abrasive water jet machining”, International Journal of Innovative Technology
and Exploring Engineering (IJITEE), Vol.9, Issue-2S2, pp.346-349 (2019). DOI:
10.35940/ijitee.B1051.1292S219
18. A. Dhanawade and S. Kumar, “Multi-performance optimization of abrasive water jet machining
of carbon epoxy composite material”, Indian Journal of engineering & Materials Sciences,
Vol.25, pp.406-416 (2018).
19. V.D.P. Rao, M. Mrudula and V.N. Geethika, “Multi-objective optimization of parameters in
abrasive water jet machining of carbon-glass fibre-reinforced hybrid composites’, Journal of The
Institution of Engineers (India): Series D, Vol. 100, Issue 1, pp.55-66 (2019). DOI:
10.1007/s40033-019-00181-6
20. F. Bañon, A. Sambruno, L. González-Rovira, J.M. Vazquez-Martinez, and J. Salguero, “A
Review on the abrasive water-jet machining of metal–carbon fiber hybrid materials”, Metals
2021, 11, 164. https://doi.org/10.3390/ met11010164
21. S. Vigneshwaran, M. Uthayakumar, and V. Arumugaprabu, “Prediction and Analysis of Abrasive
Water Jet Machining Performance on Hybrid Composite,” Journal of Testing and Evaluation,
Vol.48, No. 2, pp.1505-1519 (2020). https://doi.org/10.1520/JTE20180593
22. K. Balamurugan, M. Uthayakumar, S. Sankar, U.S. Hareesh, and K.G.K. Warrier, “Process
optimisation and exhibiting correlation in the exploitable variable of AWJM”, International
Journal of Materials and Product Technology, Vol.61, No.1, pp.6 –33 (2020) DOI:
10.1504/IJMPT.2020.111310
23. D. Maneiah, M. Shunmugasundaram, A. Raji Reddy, Z. Begum, “Optimization of machining
parameters for surface roughness during abrasive water jet machining of aluminium/magnesium
hybrid metal matrix composites”, Materials Today: Proceedings, Vol. 27, pp.1293-1298 (2020).
http://dx.doi.org/10.1016/j.matpr.2020.02.264
24. P. Thamizhvalavan, S. Arivazhagan, N. Yuvaraj and B. Ramesh, “Machinability study of abrasive
aqua jet parameters on hybrid metal matrix composite”, Mater. Manuf. Process, Vol. 34, No.3,
pp.1-24 (2018). http://dx.doi.org/10.1080/10426914.2018.1544707
25. P.J. Ross, “Taguchi Techniques for Quality Engineering”, McGraw-Hill, Singapore (1989).
26. B.V. Dharmendra, Shyam Prasad Kodali and B. Nageswara Rao, “A simple and reliable Taguchi

approach for multi-objective optimization to identify optimal process parameters in nano-powder-
mixed electrical discharge machining of INCONEL800 with copper electrode”, HELIYON, Vol.5

(2019) e02326 http://doi.org/10.1016/j.heliyon.2019.e02326
27. Muni Tanuja Anantha, Tanya Buddi, and Nageswara Rao Boggarapu, “Multi-objective
optimization basing modified Taguchi method to arrive the optimal die design for CGP of AZ31
magnesium alloy”, International Journal on Interactive Design and Manufacturing (IJIDeM),
(2023). https://doi.org/10.1007/s12008-022-01176-6